RW10-35 type outdoor H.V.Current-limiting fuse is used for protecting for voltage transforme,protecting from overload and short circuit for power circuit.
RW10-35/0.5 type melts in 1 min within 0.6-1.8A. Within 2-7.5A for 1 hour, the fusing currenthas not reguated temporarily.For 1 OA,while its current is 2 times of rated current,it melts in 1 hour.
High-voltage transmission lines to fuse with the power transformer short-circuit and overload protection, the protection of electrical equipment will not be harmed the most simple of a appliances. High-voltage fuse apply to the elevation 1000 meters, the ambient temperature does not exceed +40℃, not lower than -40℃ to use, does not apply to a
combustion,explosion hazards,severe vibration, places and the impact of swing ro-polluted area.
◆INSTALLATION AND USAGE
Rated current of melt tube should accord with circuit current when instlling fuses.
Melt tube inside the porcelain sleeve can be replaced by user when fuse melts.
Level and vertical installation are allower.